- 28 -
I
NVERTER OUTPUT SETTINGS
From this page, the user can set the output voltage of the inverter and the output frequency.
WARNING:
These settings must be correctly configured by expert personnel only; improper settings can lead to severe damage of
the load connected to the UPS output.
V
OLTAGE SETTING
To set the desired output voltage, tap on the corresponding select box. The first selection is customizable by writing the voltage in the
text box. If a low output voltage is selected, the percentage of power derating is shown on the right.
NOTE: The voltage setting is available only when the UPS is in stand-by.
General configuration page 2: Output voltage and frequency setting
F
REQUENCY SETTING
To set the desired output frequency, tap on the corresponding select box. Pre-set frequencies are 50 and 60 Hz.
NOTE: The frequency setting is available only when the UPS is in stand-by.
General configuration page 2: Output frequency configuration.