Riello UPS NetMan 204, Installation And User Manual

Page: 31 / 52

- 31 -
Email configuration
This menu may be used to configure the addresses to which to send the alarm notification and
report e-mails and other parameters of the e-mail service as described in the following table.
Field Parameters to be inserted
Enable Email Enables the Email service
Mail host
Enter the name or the address of the SMTP server to be used to
send e-mails.
(1)
SMTP port The IP port used by the SMTP protocol
Sender address
Enter the address from which the e-mails are sent.
(2)
Username
If the server requires authentication, insert the “User name”.
Password If the server requires authentication, insert the password.
Transport It is possible to choose between plain, SSL or TLS.
Email #1
Enter the e-mail addresses to which to send the alarm notifications and
reports (see note).
Email #2
Email #3
Device events Choose the event upon which the email will be sent
Send report every
day
Sends the email report every day at 00:00.
Send report every
week
Sends the email report every Monday at 00:00.
(1)
Ensure that the SMTP server accepts connections on the configured port.
(2)
Do
not use the “space” character in this field