- 7 -
MULTICOM
302
JUMPER
AND
DIP
SWITCHES
SETTINGS
INSTALLATION
1. Remove the cover of the UPS expansion slot by removing the two retaining screws.
2. Insert MultiCOM 302 in the slot.
3. Fix the cover provided using the screws previously removed.
4. Connect the PROFIBUS DP Gateway to the MultiCOM 302 using the cable provided with the device.
NOTE: if necessary, you can also use another cable realized in accordance with the specifications (see
Connection cable
MultiCOM 302
↔
PROFIBUS DP Gateway
).
5. Set the PROFIBUS node ID (see
Configuration Switches
).
6. Connect the PROFIBUS DP Gateway to the PROFIBUS DP Network.
7. Connect the power cable and apply power.
