Riedel SmartPanel 1200 Series User Manual Download Page 31

Page: 31 / 45

1200 Series SmartPanels 1.1 User Manual

-0

-B

5.3

Web Interface

The SmartPanel features a web interface for configuration purpose.

Enter the IP address of the

AES67 interface

(Ethernet connectors) of the SmartPanel in the web browser of a

PC in the same network.

The IP addresses of the SmartPanel are displayed in the

Panel-Menü

Network

AES67

A screen resolution of at least 1280x760 pixels is required to display the web interface.

figure 38: SmartPanel – web interface

Asset Drawer

All SmartPanels found in the network are listed here.

Work Surface

(future use)

Displays the user defined keys of the selected SmartPanel.

Main Menu

Firmware Update

Opens the firmware manager.

Parameter Drawer

The inputs/outputs of the audio paths A/B can be defined.

5.3.1

Asset Drawer

The

asset drawer

shows all SmartPanels found in the network.

Double-Clicking an entry opens the SmartPanel in the

Work Surface

figure 39: Asset Drawer

Enter a text in this search field to filter the displayed elements. The filtering starts while
filling this field; it is not necessary to press the enter key to start filtering.

Buttons to show/hide the asset drawer.

Clicking a column header will sort the elements in the respective column.
In total following columns are available:

Object name within the network.

Name

Panel name within the network.

IP address of the SmartPanel.

Type

Type of the SmartPanel (e.g. RSP-1232HL or RSP-2318)

List of all SmartPanels that correspond to the filter criteria.

DRAFT

05.10.2020

Summary of Contents for SmartPanel 1200 Series














































Search results

Summary of Contents for SmartPanel 1200 Series

Reviews:

Related manuals for SmartPanel 1200 Series

Brands by name

Popular brands

Riedel SmartPanel 1200 Series, User Manual

Search results

Summary of Contents for SmartPanel 1200 Series

Reviews:

Related manuals for SmartPanel 1200 Series

Brands by name

Popular brands