Cleaning, maintenance and care
Rieber GmbH & Co. KG
11
7.3 Accessories
The used materials are stainless steel and plastic.
ATTENTION
Improper cleaning can damage the surfaces of the device.
►
Observe the maximum permitted temperature of +180°C for the vacu
lid
®
and for the
vacu
lid
®
valve.
►
Clean the device with
mild washing up detergent diluted in hot water
. After
cleaning, rub surfaces dry with a
soft cloth
.
¾
Make sure you do not lose the vacu
lid
®
valve.
Tips for users
You can extend the life of the vacu
lid
®
seal by using a little oil.
►
Place the lid of the vacu
lid
®
in boiling water for about 3 minutes.
►
Afterwards, rub the seal with a drop of oil.
▌
This helps preserve the elasticity of the seal.
Make sure the device is not cleaned improperly.
ATTENTION
Improper cleaning can damage surfaces and even render the device unusable.
►
Do not scratch the services with a sharp edge. Do not use sponges with a scratchy
surface or steel wool or a steel brush.
►
Do not use any scouring agents or aggressive cleaning agents, for example oven
sprays.
►
Do not mix standard cleaning agents; do not produce your own cleaning agents.
►
Avoid long exposure to sodium chloride solutions, as these can stain or corrode
surfaces.
►
Avoid stainless steel coming into direct longer contact with rusty iron parts such as
kitchen sponges made of steel.
