background image

10

Operation

To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). Except for
230 volt models, this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician to install the proper
outlet. Do not change the plug in any
way.

NOTE:

When using the unit in the

vacuuming mode, always insert the air
diffuser in the exhaust port on the
detachable blower. This breaks up the
direct flow of air and diffuses it.

Car Nozzle -

Dry pickup nozzle for car

interiors and most upholstery cleaning.

Blower Nozzle - 

Attached to the end of a

hose or directly to the power assembly
concentrates the air for blowing
applications.

Diffuser -

Insert in the exhaust of the Vac

while vacuuming and the air exiting the
exhaust is “diffused”. This breaks up the
air coming out of the exhaust.

Extension Wands - 

These wands can be

connected together and provides
additional length for more reach.

Hose - 

Provides transfer of vacuum or

blowing capability to work site. Provides
the means of attaching extension wands
and nozzles.

Male To Male Adapter -

Use this

accessory to connect the blower nozzle
to the exhaust of the power assembly

Accessory Caddy -

Store all the

accessories with your Vac.

Caster Feet (Front) -

Store accessories

with your Vac.

Familiarize yourself with the accessories
included with the Vac. Each accessory may
be used in various ways for vacuuming
and blowing debris. Here is a list of the
accessories and their uses.

Utility Nozzle - 

General purpose nozzle for

most vacuuming applications. 

Wet Nozzle - 

Used for wet pickup on

smooth surfaces to pick up liquid and dry
the surface in one stroke.

WARNING:  To reduce the risk of fire, explosion, or damage to Vac:

• Do not leave Vac running while unattended - you may fail to notice important signs

indicating abnormal operation such as loss of suction, debris/liquid exiting exhaust,
or abnormal motor noises.  Immediately stop using Vac if you notice these signs.

• Do not leave Vac plugged-in when not in use. 

• Do not continue running when float has cut off suction.

• Do not operate Vac in areas with flammable gases, vapors or explosive dust in the air.

Sparks inside the motor can ignite airborne flammables.  Flammable gases and
vapors include:  lighter fluid, solvent-type cleaners, oil-based paints, gasoline,
alcohol, or aerosol sprays.  Flammable dusts include:  coal, magnesium, aluminum,
grain, or gun powder.

• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.

• Do not use Vac as a sprayer.

WARNING:  To reduce the risk of electric shock or injury:

• Do not expose to rain or allow liquid to enter motor compartment.  Store indoors. 

• Do not handle plug, switch, or Vac with wet hands.

• Do not service Vac while it is plugged-in.  If your Vac is not working as it should, has

missing parts, has been dropped, damaged, left outdoors, or dropped into water,
return it to an independent service center or call customer service.

• When using an extension cord, use only outdoor-rated cords that are in good

condition.
Do not allow the connection to come into contact with liquid. 

• Do not vacuum toxic materials to reduce the risk of inhaling the vapors or dust.

!

!

SP6728 16 Gallon  10/28/09  8:56 AM  Page 10

Summary of Contents for WD16650





































Reviews: