RIDGID SeeSnake Compact M40 Operator'S Manual Download Page 3

Compact 

M40 – English – 3

Introduction

The warnings, cautions, and in-

structions discussed in this manu-
al cannot cover all possible condi-

tions and situations that may occur. 
It must be understood by the opera-
tor that common sense and caution 

are factors which cannot be built 

into this product, but must be sup-
plied by the operator. 

Regulatory Statements

The EC Declaration of Conformity 

(999-995-232.10) will accompany 
this manual as a separate booklet 
when required.

This device complies with Part 15 

of FCC rules. Operation is subject 
to the following two conditions: (1) 
This device may not cause harm-
ful interference, and (2) this de-
vice must accept any interference 
received, including interference 
that may cause undesired opera-
tion.

UK Importer

 

Ridge Tool UK (RIDGID) 
44 Baker Street 
London W1U 7AL, UK

Safety Symbols

In this manual and on the product, safety 
symbols and signal words are used to com-
municate important safety information. This 
section is provided to improve understand-
ing of these signal words and symbols.

This is the safety alert symbol. It 

is used to alert you to potential in-
jury hazards. Obey all safety 
messages that follow this symbol 
to avoid possible injury or death.

 DANGER

DANGER indicates a hazardous situation 
which, if not avoided, will result in death or 
serious injury.

 WARNING

WARNING indicates a hazardous situation 
which, if not avoided, could result in death 
or serious injury.

 CAUTION

CAUTION indicates a hazardous situation 
which, if not avoided, could result in minor 
or moderate injury.

NOTICE 

NOTICE indicates informa-
tion that relates to the pro-
tection of property.

This symbol means read the op-

erator’s manual carefully before 
using the equipment. The manual 
contains important information 
on the safe and proper operation 
of the equipment.

This symbol means always wear 

safety glasses with side shields 
or goggles when handling or 
using this equipment to reduce 
the risk of eye injury.

This symbol indicates the risk of 

electrical shock.

Summary of Contents for SeeSnake Compact M40

















Reviews: