RIDGID SeeSnake Compact M40, Operator'S Manual, Page: 11 / 16

Compact M40 – English – 11
Retrieving the Camera
Pull the push cable back out of the pipe with
slow, steady force and feed small lengths
back into the drum. Wipe the push cable
with a paper towel or rag as you retrieve it.
NOTICE
Do not exert excessive
force or pull at sharp an-
gles. Feeding longer
lengths or forcing the
push cable may cause it
to loop, kink, or break.
Pipe Guides
Pipe guides center the camera in the pipe,
improve picture quality, and help keep the
lens clear. Use pipe guides when possible
to reduce wear and tear on the camera sys-
tem.
CS6x Versa Docking
System
WARNING
Do not carry the Compact M40 by the
monitor’s mounting frame or kickstand.
Doing so can cause the monitor to disen-
gage from the docking system and may
result in property damage and/or serious
injury.
Mounting the Monitor
1. Turn the docking joints on sides of the
kickstand so that the openings point
down.
Docking Joint
Mounting Frame
Mounting Clips
2. Center the CS6x Versa over the dock-
ing fins and align the docking joints
with the joint sockets.
Docking Fins
Joint Sockets
Quick-Release Knob
Socket
Guide Pin
Connector
Ridge
Outer Locking
Sleeve