RIDGID RE 6, Manual

Page: 12 / 65

10
RE 6/RE 60 Electrical Tool
RE 6/RE 60 Diagnostic Codes
Color Light Description Icon
Green
Machine ON.
18V: Recharge battery
Red
Out of temperature range 15°F (-10°C) to 122°F (+50°C).
Yellow
Service indicator after 30,000 cycles.
NOTE: Tool will lock after 32,000 cycles.
Tool is locked. Service after 32,000 cycles or after a
malfunction.
Figure 7 – LED Diagnostic Codes
SYMPTOM POSSIBLE REASONS SOLUTION
Oil leaks from tool.
Motor runs but tool will
not complete a cycle.
Dies stop during
operation.
Cutting head stops dur-
ing operation.
Troubleshooting
(Continued)
Seal or mechanical problems.
Oil level low.
Oil level low.
Cutting edges are dull or broken.
Material not within blade specification.
Contact Ridge Tool Technical Service Department
at (800) 519-3456 for nearest Independent Service
center.
Contact Ridge Tool Technical Service Department
at (800) 519-3456 for nearest Independent Service
center.
Contact Ridge Tool Technical Service Department
at (800) 519-3456 for nearest Independent Service
center.
Replace dull or broken blades with appropriate
replacements.
Change to blade specified for material to be cut.
www.tiendaisso9000.com / www.isso9000.com.mx