13 - English
Look for these accessories where you purchased this product:
Edge Guide ...................................................................................................................................................... 690119004
Edge Guide Knob ............................................................................................................................................ 511129001
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not
recommended can result in serious personal injury.
ACCESSORIES
NOTE: ILLUSTRATIONS START ON PAGE 14 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy,
as well as a Three-year Limited Warranty. For Warranty and Policy details,
please go to www.RIDGID.com or call (toll free) 1-866-539-1710.
TROUBLESHOOTING
LED LIGHT FUNCTIONS
TOOL STATUS
LED LIGHT SCENARIO
ACTION REQUIRED
Normal
Solid Light (No Flashes)
No Action Needed
Low Battery
3 Flashes
Replace Battery
Excessive Force
6 Flashes
Wait 5 Seconds
Over Temperature
9 Flashes
Let Tool Cool Off
*More than 9 flashes will result in the need to remove the battery and reinsert a few minutes later.
MAINTENANCE
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.
come in contact with plastic parts. They contain
chemicals that can damage, weaken, or destroy
plastic.
Electric tools used on fiberglass material, wallboard, spack-
ling compounds, or plaster are subject to accelerated wear
and possible premature failure because the fiberglass chips
and grindings are highly abrasive to bearings, brushes,
commutators, etc. Consequently, we do not recommended
using this tool for extended work on these types of materi-
als. However, if you do work with any of these materials, it is
extremely important to clean the tool using compressed air.
