RIDGID R843, Operator'S Manual

Page: 13 / 20

13
OPERATION
TO INSTALL BATTERY PACK
See Figure 6.
n
Place battery pack in the saw. Align raised rib on battery
pack with the groove inside the saw.
n
Make sure the latches on each side of your battery pack
snap in place and battery pack is secured in the saw
before beginning operation.
CAUTION:
When placing battery pack in the tool, be sure
raised rib on battery pack aligns with the bottom of
the saw and latches into place properly. Improper
installation of the battery pack can cause damage
to internal components.
TO REMOVE BATTERY PACK
See Figure 7.
n
Locate latches on side of battery pack and depress to
release battery pack from the saw.
n
The battery pack will automatically disconnect in
direction to be removed when buttons are depressed.
n
Remove the battery pack from your saw.
BATTERY PACK
Fig. 6
BATTERY
LATCHES
Fig. 7