background image

20

This product is manufactured under license from Ridgid,
Inc. by One World Technologies, Inc. All warranty
communications should be directed to One World
Technologies, Inc. at (toll-free) 1-866-539-1710.

90-DAY SATISFACTION GUARANTEE
POLICY

During the first 90 days after the date of purchase, if you
are dissatisfied with the performance of this RIDGID tool
for any reason you may return the tool to the dealer from
which it was purchased for a full refund or exchange. To
receive a replacement tool you must present proof of
purchase and return all original equipment packaged with
the original product. The replacement tool will be covered
by the limited warranty for the balance of the three year
warranty period.

WHAT IS COVERED UNDER THE LIMITED
THREE YEAR WARRANTY

This warranty covers all defects in workmanship or
materials in this RIDGID tool for the three year period
from the date of purchase. This warranty is specific to
this tool.  Warranties for other RIDGID products may vary.

HOW TO OBTAIN SERVICE

To obtain service for this RIDGID tool, you must return it,
freight prepaid, to an authorized RIDGID service center
for hand held and stationary power tools. You may obtain
the location of the authorized service center nearest you
by calling (toll-free) 1-866-539-1710 or by logging on to
the RIDGID website at www.ridgidwoodworking.com.
When requesting warranty service, you must present the
proof of purchase documentation, which includes a date
of purchase. The authorized service center will repair any
faulty workmanship, and either repair or replace any
defective part, at our option at no charge to you.

WARRANTY

WHAT IS NOT COVERED

This warranty applies only to the original purchaser at retail
and may not be transferred. This warranty only covers
defects arising under normal usage and does not cover
any malfunction, failure or defect resulting from misuse,
abuse, neglect, alteration, modification or repair by other
than an authorized RIDGID service center for hand held
and stationary power tools. One World Technologies, Inc.
makes no warranties, representations or promises as to
the quality or performance of its power tools other than
those specifically stated in this warranty.

ADDITIONAL LIMITATIONS

To the extent permitted by applicable law, all implied
warranties, including warranties of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE, are
disclaimed. Any implied warranties, including warranties
of merchantability or fitness for a particular purpose,  that
cannot be disclaimed under state law are limited to three
years from the date of purchase. One World Technologies,
Inc. is not responsible for direct, indirect, incidental or
consequential damages. Some states do not allow
limitations on how long an implied warranty lasts and/or
do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations may not
apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state
to state.

RIDGID

®

 HAND HELD AND STATIONARY POWER TOOL

LIMITED THREE YEAR WARRANTY
AND 90-DAY SATISFACTION GUARANTEE POLICY

One World Technologies,  Inc.

Hwy. 8

Pickens, SC 29671

Summary of Contents for R841150























Reviews: