OPERATION
ADJUSTABLE TORQUE CLUTCH
This product is equipped with an adjustable torque clutch
for driving different types of screws into different materials.
The proper setting depends on the type of material and the
size of screw you are using.
ADJUSTING TORQUE
See Figure 5.
There are eighteen torque indicator settings located on the
front of the drill.
Rotate the adjusting ring to the desired setting.
• - 3
For driving small screws
• 4 - 7
For driving screws into soft material
• 8 -
For driving screws into soft and hard
materials
• - 5 For driving screws into hard wood
• 6 - 8 For driving large screws
LED WORkLIGHT
See Figure 6.
The LED worklight on the front of the drill will come on when
the switch trigger is depressed. This provides additional
lighting on the surface of the workpiece for operation in
lower-light areas.
Fig. 5
TO DECREASE
TORQUE
TO INCREASE
TORQUE
ADJUSTING
RING
Fig. 6
kEYLESS CHUCk
See Figure 4.
The drill has a keyless chuck to tighten or release drill bits
in the chuck jaws. Grasp and hold the collar of the chuck
with one hand. Rotate the chuck body with your other hand.
The arrows on the chuck indicate which direction to rotate
the chuck body in order to
LOCk (tighten) or UNLOCk
(release) the drill bit.
WARNING:
Do not hold the chuck body with one hand and use
the power of the drill to tighten the chuck jaws on
the drill bit. The chuck body could slip in your hand,
or your hand could slip and come in contact with
the rotating drill bit. This could cause an accident
resulting in serious personal injury.
