20
Before moving/transporting your saw it is important to make sure all of the following steps have been followed to
ensure a safe condition for transportation. Failure to do so can result in serious personal injury.
• ALWAYS
turn the power off and unplug saw before transporting.
• Secure power cord to avoid any snags or hang ups during transportation.
• ALWAYS lift using the strength of your legs to lift saw; never use your back muscles to lift saw.
• DO NOT
use power On/Off switch handle or power cord to lift your saw.
• ALWAYS place the saw onto a stable and level surface with clearance for handling and maneuvering.
SAW HEAD LOCK PIN
See Figure 21.
ALWAYS lock saw head in the down position before
transporting saw. To engage saw head lock pin (F20): Push
saw head to the down position then push-in lock pin.
Saw Head lock pin is for storage and
transport only. This saw should never be locked in the down
position while making cuts.
SLIDE LOCK
See Figure 21.
ALWAYS engage the slide lock (F31) before transporting this
saw. To engage slide lock: Push saw head to the fully retracted
position then swing the slide lock lever down.
Figure
21
MOUNTING AND TRANSPORTATION
PREPARATIONS FOR TRANSPORTATION
CARRY HANDLE
See Figure 22.
For transportation use the included carry handle (F19). You
may also lift using the cast-in handle cut-outs (A) on both
sides of the saw base.
Figure 22
F20
F19
F31
A
Summary of Contents for R4251
Page 35: ...35 NOTES ...
