RIDGID R4092, Operator'S Manual

Page: 24 / 116

24 — English
Fig. 35
ASSEMBLY
Fig. 36
To close the WSUV
™
stand:
 At the same time, step on the release lever, grasp the
grips, and lift the handles up and away from the body.

Push the inner leg assembly until the release lever clicks
and locks into place.
To move the WSUV
™
stand:
 Holding the grips firmly, pull the handles toward you until
the WSUV ™ stand and saw are balanced on the wheels.

Push the saw to the desired location then either open the
WSUV
™
stand for saw operation or store the saw in a dry
environment.
To open the WSUV
™
stand:
 Step on the release lever and pull the grips toward you
at the same time.

Once the WSUV
™
stand is released from the release lever,
ease the WSUV
™
stand toward the floor by pushing the
grips toward the floor.
 With your hands on the grips, push the WSUV
™
stand
towards the ground until the saw is in an open position.
NOTE: The release lever will close over the pin locking
the WSUV
™
stand in an open position.
INNER LEG
ASSEMBLY