RIDGID R138BNA, Operator'S Manual

Page: 16 / 22

6
OPERATION
CLEARING A JAMMED FASTENER
See Figure 10.
WARNING:
Disconnect the tool from the air supply before
clearing a jammed fastener. Failure to do so could
result in serious personal injury.
If a nail or fastener becomes jammed in the tool, disconnect
the air hose and keep the tool pointed away from you while
clearing the jam.

Open magazine and remove fasteners from the tool.

Pull up on the latch and open the jam release.

Insert a flat blade screwdriver into the driving mechanism
and push the driver mechanism back, freeing the fastener
jam.
 Remove the bent fastener.

Close the jam release and latch.

Reconnect the tool to the air supply.
 Reinstall fasteners and close the magazine.
Fig. 0
laTCH
Jam
release