Required Maintenance By
RIDGID Independent Service
Center
The PEX-One Crimp Tool must be serviced at
set intervals by a RIDGID Independent Service
Center to ensure proper operation. This will
be indicated by the Tool Work/Status light
(See
Figure 6)
.
Service and Repair
WARNING
Improper service or repair can make the
machine unsafe to operate.
Service and repair on the PEX-One Crimp
Tool must be performed by a RIDGID Inde -
pendent Service Center. Use only RIDGID
service parts.
Optional Equipment
WARNING
To reduce the risk of injury, only use e -
quipment specifically designed and rec-
ommended for use with the RIDGID PEX-
One Crimp Tool, such as listed below.
PEX-One Crimp Tool
085-003-980.10_REV. A
10
Disposal
Parts
of
this
tool
contain
valuable
materials
and can be recycled. There are
companies
that specialize in recycling that
may be found
locally. Dispose of the
components
in
compli-ance
with
all
applicable regulations. Contact
your local
waste management authority for
more
information.
For EC Countries:
Do not dispose
of elec trical equipment with house-
hold waste!
According to the European Guide -
line 2012/ 19/EU for Waste Elec trical
and Electronic Equipment and its
imple men tation into national legislation, elec-
trical equipment that is no longer usable must
be collected separately and disposed of in
an environmentally correct manner.
EC Declaration of
Conformity
The EC Declaration of Conformity (890-011-
320.10) will accompany this manual as a sep-
arate booklet when required
Electromagnetic
Compatibility (EMC)
The term electromagnetic compatibility is
taken to mean the capability of the product to
function smoothly in an environment where
electromagnetic radiation and electrostatic
discharges are present and without causing
electromagnetic interference to other equip-
ment.
This tool conforms to all applicable
EMC standards. However, the possibility of
it causing interference in other devices cannot
be precluded. All EMC related standards that
have been tested are called out in the tool’s
technical document.
Catalog
No.
Description
54253
PEX-One Tool Kit (ASTM)
56638
PEX-One Tool Only
56568
ASTM Die Kit (
1
/
2
",
3
/
4
", 1")
56573
ASTM Die Set
1
/
2
"
56578
ASTM Die Set
3
/
4
"
56583
ASTM Die Set 1"
56608
Bag, 20", Soft-Sided
56603
Die Caddy
29583
Go-No Go Gauges (ASTM)
All listed batteries will work with any catalog number RBC-121
Battery Charger.
NOTICE
Catalog
Capacity
No.
Region
55183
12V 2.5Ah
All
Battery Packs
Catalog
Plug
No.
Region
Type
55193
Charger
USA, Canada and Mexico
A
44798 Charger Cord
North America
A
RBC-121 Chargers and Cords
