background image

© 2004 RIDGID, INC.

Part No. IN614300AV  9/04

Form No. IN614300AV 

Printed in U.S.A.  9/04

RIDGID AIR COMPRESSOR LIMITED THREE YEAR WARRANTY 

This product is manufactured by Campbell Hausfeld.  The trademark is licensed from
RIDGID, Inc.  All warranty communications should be directed to RIDGID air com-
pressor technical service at (toll free) 1-800-4-RIDGID.

WHAT IS COVERED UNDER THE LIMITED THREE YEAR WARRANTY 

This warranty covers all defects in workmanship or materials in this RIDGID air com-
pressor for the three-year period from the date of purchase.  This warranty is specif-
ic to this air compressor.  Warranties for other RIDGID products may vary. 

HOW TO  OBTAIN  SERVICE

To obtain service for this RIDGID air compressor you must return it, freight prepaid,
to a service center authorized to repair RIDGID air compressors.  You may obtain the
location of the service center nearest you by calling (toll free) 1-800-4-RIDGID or by
logging on to the RIDGID website at www.ridgid.com.  When requesting warranty
service, you must present the proof of purchase documentation, which includes a
date of purchase.  The authorized service center will repair any faulty workmanship,
and either repair or replace any defective part, at Campbell Hausfeld’s option at no
charge to you.

WHAT IS NOT COVERED

This warranty applies only to the original purchaser at retail and may not be trans-
ferred.  This warranty does not cover normal wear and tear or any malfunction, fail-
ure or defect resulting from misuse, abuse, neglect, alteration, modification or repair
by other than a service center authorized to repair RIDGID branded air compressors.
Expendable materials, such as oil, filters, etc. are not covered by this warranty.
Gasoline engines and components are expressly excluded from coverage and you
must comply with the warranty given by the engine manufacturer, which is supplied
with the product.  

CAMPBELL HAUSFELD MAKES NO WARRANTIES,

REPRESENTATIONS OR PROMISES AS TO THE QUALITY OR PER-
FORMANCE OF ITS AIR COMPRESSORS OTHER THAN THOSE
SPECIFICALLY STATED IN THIS WARRANTY. RIDGID, INC. MAKES NO
WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED,
INCLUDING AS NOTED BELOW.

ADDITIONAL LIMITATIONS

To the extent permitted by applicable law, all implied warranties, including warranties
of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, are disclaimed.
Any implied warranties, including warranties of merchantability or fitness for a par-
ticular purpose, that cannot be disclaimed under state law are limited to three years
from the date of purchase.  Campbell Hausfeld is not responsible for direct, indirect,
incidental, special or consequential damages.  Some states do not allow limitations
on how long an implied warranty lasts and/or do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitations may not apply to
you.  This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state. 

QUESTIONS OR COMMENTS
CALL 1-800-4-RIDGID
www.ridgid.com

Please have your Model Number and Serial Number on hand when calling.

Catalog No.

OL90150

Model No.

OL90150

Serial No.

___________

The model and serial numbers may be found on your

unit. 

Y

ou should record both model and serial number

in a safe place for future use.

Summary of Contents for OL90150





























Reviews: