10
Unpacking and Checking Contents
Tools Needed
Unpacking
WARNING:
To reduce the risk of
injury from unexpected starting or
electrical shock, do not plug the
power cord into a power source out-
let during unpacking and assembly.
This cord must remain unplugged
whenever you are working on the
tool.
Your tool is shipped complete in one box.
WARNING:
Although compact,
this tool is heavy. To reduce the risk
of back injury, get help whenever
you have to lift this tool.
1. Remove the tool and all loose parts
from the carton.
2. Place all parts on a secure, stationary
work surface and look the machine
over carefully.
List of Loose Parts
The following parts are included:
NOTE:
Before beginning assembly, check
that all parts are included. If you are miss-
ing any part, do not assemble the
machine. Call 1-866-539-1710 to get the
missing part. Sometimes small parts can
get lost in packaging material. Do not
throw away any packaging until tool is put
together. Check packaging for missing
parts before contacting RIDGID. A com-
plete parts list (Repair Parts) is at the end
of the manual. Use the list to identify the
number of the missing part.
Part or Assembly
Qty.
A Basic Assembly ................................ 1
B Arbor Wrench (stored under base) ... 1
C Operator’s Manual ............................ 1
Arbor Wrench (Supplied)
Adjustable Wrench
Carry
Handle
A
B
C
Wrench Stored
Under Base
WARNING:
If any parts are miss-
ing do not operate your cut-off ma-
chine until the missing parts are
replaced. Failure to do so could re-
sult in possible serious injury.
