20
Assembly (continued)
Mounting the Dust Chute
1. From the loose parts bag find the fol-
lowing items:
2 Screw Pan Head Lock M6 x 1
2. From the loose parts find the following
items:
1 Dust Chute
3. Open lower blade guard cover and
install dust chute. Use fasteners sup-
plied. Close lower blade guard cover.
Mounting the Table Trunnion
Support
1. From the loose parts bag find the fol-
lowing items:
2 M8 x 35 Hex Head Bolts (approx. 1-
3/8”)
2 M8 Lockwashers
1 M8 x 80 Hex Cap Bolt
(table stop bolt approx. 3-1/8” long)
1 M8 Nut (For Table Stop Bolt)
2. From the loose parts find the following
items:
1 Table
Trunnion
Support
(shown
below)
3. Attach trunnion support to saw body
with two hex head bolts and two lock-
washers as shown.
4. Thread nut (D) onto table stop bolt (C)
and attach to trunnion support.
Mounting Bevel Scale
1. From the loose parts find the following
items:
2 Screw Flat Head M5 x 0.8-15
2 Washer M5
2 Nut Hex M5 x 0.8
1 Scale Bevel
2. Insert the screws through the table and
bevel scale as shown.
3. Install a washer and nut. Tighten.
Dust Chute
Screw Pan Head
Lock M6 x 1
Lockwasher
M8
Nut Hex M8
Bolt Hex Head
M8 x 1.25-35
Screw Hex Head
M8 x 1.25-80
Screw Hex Head
M8 x 1.25-80
Lockwasher
Nut Hex
Bolt Hex Head
M8 x 1.25-35
M8
Screw Flat Hd.
M5 x 0.8-15
Washer M5 Nut Hex
Bevel Scale
M5 x 0.8
