UNITS 3 & 2 DAISY-CHAINED (PLUGGED IN) TO UNIT 1
Units 3 & 2 Daisy-Chained
to Unit 1
Unit 1 Plugged into
a GFCI Protected Outlet
UNIT 3
UNIT 2
UNIT 1
GFCI
Protected
Outlet
6
EACH UNIT DAISY-CHAINED (PLUGGED IN) TO THE NEXT UNIT
Unit 2 Daisy-Chained
to Unit 1
Unit 1 Plugged into
a GFCI Protected Outlet
UNIT 3
UNIT 2
UNIT 1
GFCI
Protected
Outlet
Unit 3 Daisy-Chained
to Unit 2
Daisy-Chain
This RIDGID Air Mover (AM2265) can be
daisy-chained. If utilizing the Daisy-Chain
feature, only use devices that total less
than the recommended 8.9 Amp maximum
outlet rating. The 9 Amp on-board circuit
breaker will allow up to four (4) additional
AM2265 Air Movers to run on one circuit at
the same time.
NOTE:
This Air Mover has an on-board
9 Amp circuit breaker. If the auxiliary outlet
overloads, the circuit breaker will trip.
If the circuit breaker does trip, turn the
switch to the off position and unplug all
units then press the circuit breaker reset
button. Plug the units back into the power
source. The outlets on the Air Mover will
be actively powered when the Air Mover is
plugged in and the circuit breaker is
properly reset.
operation
(continued)
SP7007-1 Air Mover ESF 2017.qxp_SP7007 1/9/17 10:02 AM Page 6
