background image

7 - English

FEATURES

PRODUCT SPECIFICATIONS

Stroke Length...........................................................0.59 in.
No Load Speed ............................................... 3,000 (SPM)

KNOW YOUR JIG SAW

See Figure 1, page 13.

The safe use of this product requires an understanding of 
the information on the tool and in this operator’s manual as 
well as a knowledge of the project you are attempting. Before 
use of this product, familiarize yourself with all operating 
features and safety rules.

BEVELING BASE

The base can be angled 45° left or right for a bevel cut. 

BLOWER/VACUUM SWITCH

The jig saw is equipped with a convenient switch for man-
aging dust while cutting. First setting blows air to clean  
line-of-sight while cutting. Second setting turns off air to the 
line-of-sight air vent to allow the dust to be vacuumed up 
through the rear dust port.

HEX KEY STORAGE

A hex key has been provided for use in loosening and ad-
justing no-mar base plate. When not in use it can stored in 
the hex key strap.

LED LIGHT

The LED light, located above the blade clamp, illuminates 

when the switch is turned on. This provides extra light in the 
cutting area for increased visibility.

NO-MAR BASE PLATE

A no-mar base plate has been included with the jig saw. The 
plate protects delicate surfaces from being scratched by the 
metal jig saw base.

ORBITAL FUNCTION WITH ON/OFF SWITCH

The orbital function on/off switch allows user control of the 
orbital movement of the saw blade. 

OVERMOLD GRIP AREA

The grip area is overmold for improved grip and comfort.

RAPID CHANGE BLADE CLAMP

The rapid change blade clamp allows for changing saw 
blades without the need for separate tools.

RECESSED BLADE SUPPORT ROLLER

The recessed blade support roller ensures accurate cutting 
during orbital and non-orbital cutting.  

SLIDE SWITCH

The slide switch features a soft start to prolong motor life and 
gives the operator more control when starting the jig saw.

VACUUM PORT

1-1/4 in. vacuum port conveniently fits a standard hose size 
for a cleaner work area.

Input ..................................120 V, AC Only, 60 Hz, 3.0 Amp
Weight ..................................................................... 4.4 lbs.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for 39143















Reviews: