Ridge S-14-100-375UT, Installation And Operation Manual

Page: 4 / 12

Page 4 Security Brands, Inc.
STEP 1 - MOUNTING THE UNIT
Page 3 details the tools and instruments you will need to install your unit and includes a parts checklist. Make sure to
have all the tools listed handy. Upon opening the box, ensure that all parts on the checklist are present. If any items are
missing from your unit, contact Security Brands immediately at (800) 541-5677.
Mounting the unit to your own pedestal
An optional square mounting fl ange can be purchased from Security Brands. The square mounting fl ange may be welded
to your pedestal and the fl ange bolt pattern will align with the back of the unit. Position the unit against the fl ange and
install the four carriage bolts from the back side. Secure the unit by tightening down the four hex nuts with a 7/16" socket.
Mounting the unit to a Kodiak Black gooseneck pedestal (18-001) or dual pedestal (18-003)
Locate the four carriage bolts and four hex nuts included with the unit. Position the unit against the pedestal fl ange and
install the four carriage bolts from the back side. Secure the unit by tightening down the four hex nuts with a 7/16" socket.
INTRODUCTION
Your new Ridge keypad is a high-quality, commercial-grade, programmable, battery-powered, wireless, digital access
control system. The unit is designed to operate at extremely low current and therefore is perfect for solar applications.
The Ridge operates using a standard 9-volt battery. The unit is composed of a durable polycarbonate housing to allow
maximum signal performance and will last for years of worry-free operation.
IMPORTANT!
PLEASE BE SURE TO READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE PROCEEDING
WITH INSTALLATION AND PROGRAMMING!
18-001 18-003