background image

RIDGE

ACCESSORIES

PAGE 20

WARRANTY

This product is guaranteed against defects for a period of 24 months from date of 

purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Su-

percheap Auto) of 751 Gympie Rd Lawnton QLD 4501. Ph (07) 3482 7500. Supercheap 

Auto will offer a repair, replacement product or store credit if the product is assessed as 

being defective during the warranty period. 

To claim under this warranty, take this product to the Front Service Desk of your nearest 

Supercheap Auto store. For store locations, visit www.supercheapauto.com.au (AUS) 

or www.supercheapauto.co.nz (NZ). You will need your receipt or proof of purchase. 

Additional information may be requested of you to process your claim. Should you not be 

able to provide proof of purchase with a receipt or a bank statement, identification show-

ing your name, address and signature may be required to process your claim. This prod-

uct may need to be sent to the manufacturer to assess the defect before determining 

any claim. Faults or defects caused by product modification, misuse and abuse, normal 

wear and tear or failure to follow user instructions are not covered under this warranty. 

Our goods come with guarantees that cannot be excluded under the Australian 

Consumer Law. You are entitled to a replacement or refund for a major failure and for 

compensation for any other reasonably foreseeable loss or damage. You are also 

entitled to have the goods repaired or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a major failure. 

Any expenses incurred relating to the return of this product to store will normally have to 

be paid by you. For more information contact your nearest Supercheap Auto store. 

The benefits to the consumer given by this warranty are in addition to other rights and 

remedies of the Australian Consumer Law in relation to the goods and services to which 

this warranty relates.

PLU: 533226    CODE RR100A

Manufactured and packaged for SRGS PTY LTD

ABN 23 113 230 050

751 Gympie Road, Lawnton Queensland 4501, Australia

MADE IN CHINA

Summary of Contents for RR100A





















Reviews: