Battery Pack Installation and Removal
Battery Pack Location
The Capri’s battery pack enclosure is conveniently located on the floor boards. It is theft
protected via a locking deadbolt. Your ignition key opens this lock. The enclosure makes
changing the battery pack safe and easy. Battery packs last for thousands of miles. this procedure
is only needed for replacing worn out batteries not for charging the batteries.
Locate the anti battery theft deadbolt lock located on the scooter’s floor board. Use your
ignition key to unlock the battery enclosure. Turn the key counter clockwise to unlock the
battery pack enclosure. Once this task is accomplished there are two handles to lift out the
battery pack. The pack weighs 65lbs. The two handles may require a blade screw driver to pry
them upward. As the battery pack is lifted you will notice an attached battery power cord. Lift
the battery out and let it rest on the floor board before removing the plug. The battery power
cord is pressure fit and secured. To remove, wiggle and pull the plug at the top closest to the
battery pack. Never pull on the cord. Now you can easily remove the battery enclosure pack. To
install simply reverse the process.
SHOCK HAZARD : Prior to removing the battery pack,
disconnect the battery charger if connected. Perform this
task in a clean, dry work space. Switch the under drivers
seat Main Breaker to the OFF position. DO NOT allow
metal or liquid to come in contact with any of the batteries
wiring. This procedure is only for battery replacement not
battery charging.
!
WARNING
Recycling
There are no serviceable parts in the battery pack enclosure. Safely dispose of the battery pack
the same as you would an automotive battery. Recycling Centers are listed in all major phone
directories. Most major retail chains that sell automotive batteries will also accept batteries for
recycling. NEVER DISCARD the battery pack in your regular trash pick up. This is illegal and not
very environmentally conscious.
The Capri’s battery pack enclosure is theft protected via a locking dead bolt. It removes
easily. Lift out by using the enclosure’s handles, unplug, then plug in a new battery
pack enclosure.
Y
our ignition key
is used to unlock the
battery pack enclosure
13
Please recycle
your battery pack
