Using the remote control, it is possible to control the SMART thermostat with the
same operating modes: Stand-by, Fil Pilot, Comfort, Night, Antifreeze, Thermostat
Programmable, BOOST 2H, ECO, detection of open windows, ASC.
For more information and detailed instructions, see the website.
www.ridea.it
or write to
WI-FI MODULE
REMOTE CONTROL
As an
alternative to the application
, the electronics also communicate with a remote control
which can be purchased on request.
The remote control has a wireless connection: it can be portable or attached to the wall near
the radiator (
max. 4 meters
).
To activate the Wi-Fi module and control the domestic radiators remotely, proceed
as following:
1)
Go to the Wi-Fi area of the application [Fig.
16
a];
2)
Select
ADD WI-FI
[Fig. 17b];
3)
Select
ADD THERMOSTAT NOT YET CONNECTED TO THE HOME NETWORK
[Fig.
16
c];
4)
Activate the Wi-Fi of the smartphone / tablet;
5)
Connect to the thermostat's Wi-Fi network;
6)
The application will ask you to connect to the home network.
7)
Enter the password for the home router. (
ATTENTION
: if you enter a password
wrong pass, activate RESET procedure: press the connection button on the
thermostat for 15 seconds.)
8)
Select
ADD WI-FI
again [Fig.
16
b];
9)
Select
ADD THERMOSTAT ALREADY CONNECTED TO THE HOME NETWORK
[Fig.
16
c];
10)
At this point, scan the QR code provided with the thermostat packaging;
11)
Rename the radiator as you prefer.
[Fig. 1
7
]
20
