Ridder Aqua CX300, User Manual

Page: 43 / 92

3.3.1.13 Program characteristics
Fogging/roof sprinklers
Fogging priority
Irrigation based on
Set valve sequence
External EC/pH control
Response to EC/pH alarm
Flow rate alarm
Response to external contact
Stir fertilizer tanks <1 - 8>
Irrigation by
Open valve delay
Auxiliary output
Path: Settings>Programs>Program name>Program characteristics
Fogging/roof sprinklers
No: Program will be used for normal irrigation purposes.
Yes: Program will be used for either fogging or roof sprinkling purposes.
Fogging priority
No: Fogging or roof sprinkling will not be given priority.
Yes: Fogging or roof sprinkling will be given priority.
If a fogging program and another program are active at the same time, the
pre-set 'Number of valves simultaneously' (up to 6) may be insufficient to
enable both programs to operate normally.
Irrigation based on
Time: Irrigation will be applied by time only.
Volume: Irrigation will be applied by volume only.
Time+Volume: Irrigation will be applied by time and volume. Irrigation will stop
when either is reached. The 'Activities' summary will display the irrigation time.
Time: Irrigation will be applied by time and volume. Irrigation will stop
when either is reached. The 'Activities' summary will display the irrigation volume.
Set valve sequence
If this option is activated, you can modify the sequence of the valves in a particular
valve group. The sequence of the valves is determined by the sequence number
entered for each valve.
Aqua CX300
43