P/N XXXXX vX.XX
Page | 10
3)
Identification Number (Serial Number)
–
10-digit number that
identifies a particular Player Unit. This number will appear in the
Riddell Sideline Monitor application when the Player Unit is added.
This number is used to assign individual Player Unit hardware to a
Player.
INSTALLATION INTO HELMETS
Proper installation and setup of the InSite Impact Response System is
required for correct product operation. Please keep in mind the
following key points and instructions as you prepare for use:
•
InSite Player Units and Overliners are designed to fit specific Riddell
helmet models and sizes (see www.Riddell.com). To ensure player
safety and proper impact measurement performance, use InSite
only with compatible helmet types.
•
InSite Alert thresholds are assigned based on Playing Position and
Skill Level. For correct operation of InSite, Playing Position and Skill
Level must be properly assigned to each player when configuring
InSite (
see Player Setup, p.34
).
•
Do not fold, crease, or tear the Player Unit sensor at any point
during installation as this may affect impact sensor and system
performance. Please contact Riddell Customer Service at (800)
275-5338 for assistance with damaged equipment.
RIDDELL AXIOM INSTALLATION INSTRUCTIONS
TBD
RIDDELL SPEEDFLEX TRUE INSTALLATION INSTRUCTIONS
TBD
RIDDELL SIDELINE MONITOR OPERATIONS