background image

www.ridatool.com

www.ridatool.com

10

11

RCW787-1A

RCW787-1A

• When working with the device make sure the area is well lit. 

Bad vision can 

  result in injuries caused by the power tool. 

• Only use drill and screwdriver bits authorised by the manufacturer. 

The use 

   of different drill and screwdriver bits may cause a risk of injuries and 
   damages to the power tool. Make sure that the drills and screwdriver bits 
   are securely installed before switching on the device.

• Prevent overheating of the device and the work piece. 

Excess heat may 

  damage the tool and the device. 

  

• Never use power tool near flammable materials. 

Sparks may set fire to these 

  materials.

 

• Keep the handles dry and free of grease. 

Slippery handles can lead to 

  accidents.

 

• Do not use accessories that have not been designed and recommended by 

  the manufacturer for this specific power tool. 

Just because you are able to 

  attach an accessory to your power tool this does not guarantee that it is 
  safe to use.   

  

• The permitted revolutions of the tool must be at least as high as the highest 

   revolutions specified on the power tool. 

Accessories that rotate faster than 

   they are permitted to may break and fly and thus cause injuries.  

   

• 

Remember that moving parts may also be located behind ventilation and 

  venting slots. 

• 

Symbols affixed to your unit may not be removed or covered. Information 

  on the unit that is no longer legible must be replaced immediately.  

Before putting the unit into operation, read and observe the 
instructions for use. 

Risk of damage to the eyes! Never look di-rectly into the LED.

• 

Incorrect use of the product;

• 

Unsuitable tools inserted;

• 

Unsuitable material;

• 

Insufficient maintenance.

RISKS CAUSED BY VIBRATIONS

The vibration values specified in the technical data represent the main uses 
of the device. The actual existing vibrations during use may deviate from 
these as a result of the following factors:   

CAUTION! Risk of injury due to vibra-tions! 

Vibrations may, in 

particular for per-sons with circulation problems, cause dam-age to 
blood vessels and/or nerves. If you notice any of the following 
symptoms, stop working immediately and consult a doctor. 
Numbness of body parts, loss of sense of feeling, itching, pins 
and needles,pain, changes in skin colour.    

 

Only re-charge the battery pack indoors.

Do not dispose of a battery pack with the household waste! 

Do not dispose of a battery pack in water!

Do not burn the battery pack!

Do not expose the battery pack to sunlight or increased 
temperatures! 

MAX xx °C

Summary of Contents for RCW787-1A














Reviews: