Ricon Aficio 1502 Operation Instruction Manual Download Page 21

Page: 21 / 102

1. Basics

Turning on the Power

To turn the machine on, press the operation switch.

Note

❒

This machine automatically enters Energy Saver mode or turns itself off if you
do not use the machine for a while. See “6.Auto Off Timer” in the System Set-
tings manual.

Power switches

This machine has two power switches.

❖

Operation switch (right side of the operation panel)

Press this switch to activate the machine. When the machine has warmed up,
you can make copies.

❖

Main power switch (left side of the machine)

When the machine is not to be used for an extended period of time, turn off
the main power switch.

Turning on the Main Power

Make sure that the power cord is firmly plugged into the wall outlet.

Turn on the main power switch.

The

main power

indicator on the operation panel goes on.

Summary of Contents for Aficio 1502







































































































Search results

Summary of Contents for Aficio 1502

Reviews:

Related manuals for Aficio 1502

Brands by name

Popular brands

Ricon Aficio 1502, Operation Instruction Manual

Search results

Summary of Contents for Aficio 1502

Reviews:

Related manuals for Aficio 1502

Brands by name

Popular brands