background image

32DSSK03.B

 

1 - 2 

B. PRODUCT 

WARRANTY

 

 

RICON CORPORATION K-SERIES PRIVATE USE WHEELCHAIR LIFT 

 

FIVE-YEAR LIMITED WARRANTY 

Ricon Corporation (Ricon)

 warrants to the original purchaser of this product that Ricon will repair or replace, at 

its option, any parts that fail because of defective material or workmanship as follows: 

  Repair or replace parts for a period of one year from the date of purchase.  A complete list of parts covered 

by this warranty can be obtained from an authorized Ricon dealer. 

  Labor costs for specified parts replaced under this warranty for a period of one year from date put into ser-

vice.  A Ricon rate schedule determines parts covered and labor allowed. 

  Repair or replace lift powertrain parts for a period of five years from date of purchase.  A complete list of 

parts covered can be obtained from an authorized Ricon dealer or Ricon Product Support. 

If you need to return a product:

  Return this product to your installing dealer, or to Ricon, following the Ricon 

RMA procedure.  Please give as much advance notice as possible, and allow a reasonable amount of time for 
repair. 

This warranty does not cover:

 

  Labor or service charges. 

  Malfunction or damage to product parts caused by accident, misuse, lack of proper maintenance, neglect, 

improper adjustment, modification, alteration, the mechanical condition of the vehicle, road hazards, over-

loading, failure to follow operating instructions, or acts of nature (i.e., weather, lightning, flood).   

NOTE

:  Ricon recommends that this product be inspected by an authorized Ricon service technician at least 

once every six months, or sooner if necessary.  Required maintenance should be performed at that time. 

            

WARNING 

THIS PRODUCT HAS BEEN DESIGNED AND MANUFACTURED TO EXACT SPECIFICATIONS.  

~  ANY MODIFICATION OF THIS PRODUCT CAN BE HAZARDOUS  ~ 

This warranty is void If:

 

  The product has been installed or maintained by someone other than an authorized Ricon service techni-

cian. 

  The product has been modified or altered in any respect from its original design without written authoriza-

tion by Ricon. 

Ricon disclaims liability for any personal injury or property damage that results from operation of a Ricon 

product that has been modified from the original Ricon design.  No person or company is authorized to 

change the design of this Ricon product without written authorization by Ricon. 
Ricon's obligation under this warranty is exclusively limited to the repair or exchange of parts that fail within 

the applicable warranty period. 
Ricon assumes no responsibility for expenses or damages, including incidental or consequential damages.  

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above 

limitation or exclusion may not apply. 
Important:  The warranty registration card must be completed and returned to Ricon within 20 days after in-

stallation of this Ricon product for the warranty to be valid.  The warranty is not transferable. 
The warranty gives specific legal rights.  There may be other rights that vary in each state. 

 

Summary of Contents for 32DSSK03






























Reviews: