Ricoma Quick Start Guide
5
QUICK
START
1
2
3
Step 1
Install Signmaster (in the kit-box). Refer to Video software to install and connect.
Step 2
Connect the cutter and computer with the Original Black Cable (Option 1) Recommended
2. Use Your U-Disc (USB Flash disk) and insert it into the cutter port (Option 2)
Recommended
Step 3
Basic cut: Design your work and send it to cut in Signmaster (Refer to basic cut video).
Contour cut: Design your work and send it to contour cut in Signmaster (Refer to contour
cut video).
Note:
1.Signmaster online download address:
http://fcws6.com/downloads/signmaster/craft/SignMaster_UniverCraft.exe
2. Please DO NOT lose the Signmaster PSN code. If you need to change computers to install Signmaster,
please deactivate it before installing it in another computer.
3. Signmaster is supported by all windows systems.
4. If you encounter any problems, please refer to the troubleshooting section (refer to file 1.5).
