manualshive.com logo in svg

Ricoh SR4110, Field Service Manual

The Ricoh SR4110 Field Service Manual is a comprehensive guide for technicians working with this advanced printing device. Offering in-depth instructions and troubleshooting tips, this manual is essential for maintaining optimal performance. Download the free manual from our website for hassle-free access to valuable information and expert guidance.

Share
Download
background image

 

1 

Table of Contents 

1.

 

Detailed Descriptions .........................................................................................................................................3

 

Mechanism Descriptions ....................................................................................................................................... 3

 

Fuse List ............................................................................................................................................................ 3

 

Component Layout ............................................................................................................................................ 5

 

Electrical Components ...................................................................................................................................... 6

 

Drive Layout ..................................................................................................................................................... 9

 

Mechanism Details .............................................................................................................................................. 11

 

Inverter ............................................................................................................................................................ 11

 

Shift Tray ........................................................................................................................................................ 12

 

Pre-stack .......................................................................................................................................................... 14

 

Staple Tray Jogger ........................................................................................................................................... 15

 

Stapling ........................................................................................................................................................... 17

 

Punch (2-hole Punch Unit) .............................................................................................................................. 21

 

Jam Detection .................................................................................................................................................. 23

 

DIP SW ........................................................................................................................................................... 24

 

2.

 

Replacement and Adjustment ...........................................................................................................................25

 

Covers .................................................................................................................................................................. 25

 

Front Door, Left Inner Cover, Inner Cover ..................................................................................................... 25

 

Inner Cover ...................................................................................................................................................... 26

 

Side Table and Upper Tray ............................................................................................................................. 26

 

Left Covers, Rear Cover, Top Cover, Shift Cover .......................................................................................... 27

 

Jogger Unit Cover ........................................................................................................................................... 28

 

Rollers ................................................................................................................................................................. 29

 

Drag Roller ...................................................................................................................................................... 29

 

Positioning Roller ............................................................................................................................................ 29

 

Alignment Brush Roller .................................................................................................................................. 30

 

Jogger Fence .................................................................................................................................................... 31

 

Sensors................................................................................................................................................................. 33

 

Paper Height Sensors ...................................................................................................................................... 33

 

Exit Guide HP Sensor ..................................................................................................................................... 33

 

Upper Tray Full and Exit Sensors ................................................................................................................... 34

 

Shift Tray Exit Sensor ..................................................................................................................................... 35

 

Main Board, Pre-Stack Paper Sensor .............................................................................................................. 36

 

Staple Trimmings Hopper Full Sensor ............................................................................................................ 37

 

Stapler Rotation HP and Stapler Return Sensors ............................................................................................ 38

 

Stapler ............................................................................................................................................................. 39

 

Shift Tray ............................................................................................................................................................. 41

 

Summary of Contents for SR4110





























































Reviews:

No comments

Related manuals for SR4110

Brands by name

Popular brands

Load more brands