manualshive.com logo in svg

Ricoh SP C435DN, User Manual

Share
Download
Ricoh SP C435DN User Manual Download Page 76

Problem

Cause

Solution

Printed paper becomes
creased.

The paper is damp.

Use paper that has been stored
in the recommended
temperature and humidity
conditions. For details about the
proper way to store paper, see
page 32 "Paper Precautions".

Printed paper becomes
creased.

The paper is too thin.

Use recommended paper. For
details about recommended
paper, see page 28 "Paper
Size Specifications" and
page 30 "Paper Type
Specifications".

Edges of sheets are creased.

The paper is damp.

Use paper that has been stored
in the recommended
temperature and humidity
conditions. For details about the
proper way to store paper, see
page 32 "Paper Precautions".

Edges of sheets are creased.

You are using non-
recommended paper.

Use recommended paper. For
details about recommended
paper, see page 28 "Paper
Size Specifications" and
page 30 "Paper Type
Specifications".

Duplex printing is
malfunctioning.

You have selected a paper tray
that is not set for duplex print.

Change the setting to enable
duplex printing for the paper
tray.

The image on the back side of
duplex printing has mottled
blank patches or is smudged.

Missing patches and smudges
are caused by moisture leaking
from the paper.

• Do not install the printer in

areas that are susceptible
to low temperature.

• Use paper that has been

stored in the recommended
temperature and humidity
conditions. For details
about the proper way to
store paper, see page 32
"Paper Precautions".

3. Troubleshooting

74

Summary of Contents for SP C435DN





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands