5828 158
IPv6 Gateway
This SP is the IPv6 gateway address referenced on the Ethernet
or wireless LAN (802.11b). The IPv6 address consists of a total
128 bits configured in 8 blocks of 16 bits each. These notations
can be abbreviated. See "Note: IPV6 Addresses " below this
table.
5828 161
IPv6 Statelss Auto
Enables or disables the IPv6 Stateless Auto setting on the Ethernet
or wireless LAN (802.11b).
0: Off, 1: On
Note: IPV6 Addresses
Ethernet and the Wireless LAN (802.11b) reference the IPV6 "Link-Local a Prefix Length". The
IPV6 address consists of 128 bits divided into 8 blocks of 16 bits:
aaaa:bbbb:cccc:dddd:eeee:ffff:gggg:hhhh:
The prefix length is inserted at the 17th byte (Prefix Range: 0x0to0x80). The initial setting is 0x40(64).
For example, the data:
2001123456789012abcdef012345678940h
is expressed:
2001:1234:5678:9012:abcd:ef01:2345:6789: prefixlen 64
However, the actual IPV6 address display is abbreviated according to the following rules.
Rules for Abbreviating IPV6 Addresses
1. The IPV6 address is expressed in hexadecimal delmited by colons (:) with the following characters:
0123456789abcdefABCDEF
2. A colon is inserted as a delimiter every 4th hexadecimal character.
fe80:0000:0000:0000:0207:40ff:0000:340e
3. The notations can be abbreviated by elminating zeros where the MSB and digits following the MSB
are zero. The example in "2" above, then, becomes:
fe80:0:0:0207:40ff:0:340e
4. Sections where only zeros exist can be abbreviated with double colons (::). This abbreviation can be
done also where succeeding sections contain only zeros (but this can be done only at one point in
the address). The example in "2" and "3" above then becomes: fe80::207:40ff:0:340e (only the first
null sets zero digits are abbreviated as "::")
-or-
fe80:0:0:0:207:40ff::340e (only the last null set before "340e" is abbreviated as "::")
5832
HDD Init.
Printer Engine Service Mode
111
5
Summary of Contents for S-P2
