Ricoh Ri 2000 Quick Installation Manual Download Page 68

Page: 68 / 72

Étiquettes de sécurité de cet appareil

Cette section contient des informations concernant les étiquettes d'information de sécurité de l'appareil.

Emplacements des étiquettes AVERTISSEMENT et ATTENTION

Cet appareil comporte des étiquettes

AVERTISSEMENT et

ATTENTION situées aux emplacements

illustrés ci-dessous. Pour votre sécurité, suivez les instructions et manipulez l'appareil de la manière indiquée.

Avant

Faites attention à ne pas vous coincer la main ou une autre partie du corps dans le chariot.

Faites attention à ne pas vous coincer les mains ou une autre partie du corps dans le capot avant.

Les pièces mobiles peuvent écraser et couper. N'approchez pas les mains. Ne faites pas
fonctionner avec le carter retiré.

Veillez à ne pas coincer vos mains ou toute autre partie de votre corps par la base de la table
d’platine.

Faites attention à ne pas vous coincer la main ou une autre partie du corps dans la platine.

Arrière

La machine pèse environ 140 kg (308 lb). Assurez-vous de la transporter à l'aide de 6 personnes.

Cette étiquette est destinée aux techniciens d'entretien.
MISE EN GARDE : PÔLE DOUBLE/FUSIBLE NEUTRE
Les câbles doivent être déconnectés pour mettre hors tension les conducteurs de phase.

Summary of Contents for Ri 2000









































































Search results

Summary of Contents for Ri 2000

Reviews:

Related manuals for Ri 2000

Brands by name

Popular brands

Ricoh Ri 2000, Quick Installation Manual

Search results

Summary of Contents for Ri 2000

Reviews:

Related manuals for Ri 2000

Brands by name

Popular brands