Ricoh Pro C5100 Series, Manual

Page: 34 / 40

Sleep mode
• If this machine remains idle for a specified period or when the [Energy Saver] key is pressed, it
enters Sleep mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep mode is 60 minutes. This
default time can be changed.
• The machine can print jobs from computers while in Sleep mode.
Specification
Type 1 Type 2
Reduced electrical consumption in Low
Power mode
*1
170.4 W 171.5 W
Time of switch into Low Power mode 15 minutes 15 minutes
Time of switch out from Low Power
mode
*1
45 seconds 45 seconds
Reduced electrical consumption in Sleep
mode
*1
0.70 W 0.67 W
Time of switch into Sleep mode 60 minutes 60 minutes
Time of switch out from Sleep mode
*1
300 seconds 300 seconds
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see "Timer Settings", Connecting the
Machine/ System Settings .
• The machine enters sleep mode directly in the following situations:
• Low Power Mode Timer and Sleep Mode Timer are set to the same time
• Sleep Mode Timer is set to a shorter time than Low Power Mode Timer
• Depending on which embedded software application is installed on it, the machine might take
longer than indicated to enter Sleep mode.
Notes to users in the state of California (Notes to Users in USA)
Perchlorate Material - special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/
perchlorate
3. Other Information for This Machine
32