manualshive.com logo in svg

Ricoh PJ WU5570, User Manual, Page: 49 / 93

Share
Download
Ricoh PJ WU5570 User Manual Download Page 49

English

47

English

User Settings

 Network

 

 

Configure the network settings.

Network State

Connected

DHCP

On

IP Address
Subnet mask
Gateway
DNS
Apply
MAC

Select

Enter

Exit

LAN

 

  Network State: Display the network connection status.

 

   DHCP:  Select  “On” to allow the projector to obtain an IP 

address automatically from your network. Select “Off” to 

manually assign IP, Subnet Mask and Gateway configuration.

DHCP

On

Off

 

  IP Address: Set an IP address or display IP address provided 

from DHCP server when DHCP is set to “On”.

IP Address

IP Address

 

  Subnet mask: Set subnet mask number or display subnet mask 

number provided from DHCP server when DHCP is set to 

“On”.

 

  Gateway: Set the default gateway of the network connected 

to the projector or display the default gateway of the network 

provided from DHCP server when DHCP is  is set to “On”.

 

  DNS: Display the IP address of the domain name system (DNS) 

server.

 

   Apply:  Select  “Yes” to apply the changes made in network 

configuration settings.

Apply

Yes

No

 

  MAC: Display MAC address.

 

Consult network 

administrator for 

network settings.

Note

Summary of Contents for PJ WU5570






























































































Reviews:

No comments