manualshive.com logo in svg

Ricoh PJ WU5570, User Manual, Page: 35 / 93

Share
Download
Ricoh PJ WU5570 User Manual Download Page 35

English

33

English

Basic Operations

Warning Indicator

  When the “Temp” i

ndicator lights 

red

, it indicates the 

projector has overheated. The projector will auto

matically 

shut itself down.

 

Please:

Warning! TEMPERATURE TOO HIGH

1. Make sure air in and outlets are not blocked.

2. Make sure the environment temperature is under 40 degress C.

  When the “Lamp” i

ndicator lights 

red

, and

 you see the 

message below displays on-screen, the projector has 

detected that the lamp is approaching its end of life. Please 

change the lamp as soon as possible or contact your local 

dealer or our service center. 

 

Warning! Lamp

Lamp is approaching the end of its useful life.

Replacement Suggested!

  When the “Temp” indi

cator flashes 

red

 (

0.5 sec on, 0.5 sec 

off)

 and the message below displays, it indicates the cooling 

fan failed. Stop using the projector and disconnect the po

wer 

cord from the electrical outlet, then contact your local dealer 

or our service center. 

 

Warning! FAN LOCKED

The projector will switch off automatically.

For more information of the warning indicator, please see  

page 80.

Summary of Contents for PJ WU5570






























































































Reviews:

No comments