![Ricoh PJ LU8000 Series User Manual Download Page 52](http://html.mh-extra.com/html/ricoh/pj-lu8000-series/pj-lu8000-series_user-manual_1457121052.webp)
52
Sharpness
Select the edge clarity of the image.
Color
Adjust a video image from black and white to fully saturated color. The color setting
applies to video sources only.
Tint
Adjust the red-green color balance in the image of video images. The tint setting
applies to video sources only.
Phase
Analog signals only. Adjust pixel phase when the image still shows shimmer or
noise after pixel tracking is optimized. Pixel phase can adjust the phase of the pixel-
sampling clock relative to the incoming signal.
Frequency
Analog signals only. Steady flickering or several soft vertical stripes or bands across
the entire image indicates poor frequency. Proper frequency ensures that the image
quality is consistent across the screen, the aspect ratio is maintained, and that the
pixel phase can be optimized.
Horz Position
Move the image right or left within the area of available pixels.
Vert Position
Move the image up or down within the area of available pixels.
3D Display
Select the 3D relating settings.
• 3D Enable:
-
Off: Disable 3D function.
-
On: Set 3D format. Supports Mandatory 3D formats and frame sequential
3D@120Hz.
• 3D Invert: When 3D synchronous error, user can toggle the item to correct 3D
synchronous.
• DLP Link: Select 3D Sync source:
-
Off: 3D Sync source is from the
3D Sync
port.
-
On: 3D Sync type is DLP link.
NOTE:
3D supported format timings:1280x720@120Hz, 1024x768@120Hz frame sequential.
When input timing is 120 Hz frame sequential, the keystone and color temperature function will be disable temporary.