2
Gettin
g Starte
d
40
The selected capture mode
is displayed on the monitor
(Guide Display).
y
Guide Display settings
6
Look through the viewfinder to view the subject.
When using a zoom lens, turn the zoom ring to the right
or left to change the angle of view.
7
Position the subject inside
the AF frame and press
0
halfway.
The focus indicator (
P
) appears
and you will hear a beep when
the subject comes into focus.
y
Sound Effects settings
8
Press
0
fully.
The captured image is displayed on the monitor (Instant
Review).
Available operations during Instant Review
1
Press
K
in Step 6 on
The Live View image is displayed
on the monitor.
2
Position the subject inside
the AF frame on the monitor
and press
0
halfway.
The AF frame turns green and
you will hear a beep when the
subject comes into focus.
Available operations during Live View
Subsequent steps are the same as shooting with the viewfinder.
t
Memo
•
You can use
I
to focus on the subject. (p.51)
•
You can preview the image on the monitor and check the
depth of field before shooting. (p.55)
•
You can set the operation and display settings for Instant
Review in [Instant Review] of the
A
5 menu. (p.24) When
[Display Time] is set to [Hold], Instant Review is displayed
until the next operation.
•
When the function dial is set to
R
, you can magnify the image
using the setting dial.
L
Deletes the image.
R
to the right
Magnifies the image.
H
Saves the RAW data (only
when a JPEG image was
taken and the data remains
in the buffer).
1/
1/
250
250
1600
1600
FF
5.6
5.6
Scene Analyze Auto
Scene Analyze Auto
Focus indicator
Shooting with Live View
E
Magnifies the image.
Use
R
to change the magnification (up to
16×).
Use
ABCD
to change the area to display.
Press
M
to return the display area to the
center.
Press
E
to return to 1× image display.
K
Exits shooting with Live View.
1/
2000
1/
2000 F2.8
F2.8
1600
1600
9999
9999
AF frame
K1-OPM-EN.book Page 40 Tuesday, March 22, 2016 5:05 PM
