4 - RDC-i700 Windows XP Installation Guide
2. Important notes
These instructions will guide you through the process of installing the RDC-i700 USB driver and utility
software on your Windows XP computer. Be sure to read, understand, and observe all precautions and
requirements prior to attempting these procedures. If you feel you need assistance, please contact our
customer support network at the URL listed in the
Customer support
section below.
• Operating System: Windows XP (operation not guaranteed with other operating systems)
• Memory: 128MB or more (256MB or more is recommended)
• Connection cable: Use the dedicated cable included in the package
• Retrofit USB ports added by using an expansion feature (such as PCI bus) cannot be supported.
• Driver may fail to operate correctly when used with a USB hub or other USB devices.
3. Customer support
The following URLs may be useful if you need support during the installation process.
Download Windows XP-compatible software
http://www.ricoh.co.jp/r_dc/dc/notices/xp-dl.html
Contact Ricoh’s customer support team
http://www.ricoh.co.jp/r_dc/dc/support/inquiry.html
4. Installing the USB driver
Note:
The authority to install the driver to Windows XP is limited to users with administrator accounts. Users
who cannot log on as administrators will not be able to install this driver.
I. Prior to installation
(1) Download the latest RDC-i700 software at the URL above. Be sure to note the location where you
save the downloaded files. You will need that information during the installation. Also, be sure to save the
downloaded files to your computer’s hard drive.
(2) Save any important data you may be using and then quit all running applications.
(3) Disconnect any other USB or Plug & Play devices.
II. Installation procedure
Before connecting the RDC-i700 to your computer
(1) Browse to the folder where you saved the downloaded files. Locate the
Win2000
folder and open it.
(2) Click on the
setup.exe
icon to start the installation process.
(3) Choose your preferred language from the list and click
OK
.
(4) Click
Next
at the Welcome screen.
(5) Choose whether to restart you computer now or later, then click
Finish
to complete the installation.
After connecting the RDC-i700 to your computer
