1
Shooting
Mode P: Program Shift
Setting the mode dial to P (program shift mode) allows you to select a
combination of aperture value and shutter speed. When the ISO setting
is set to [Auto] or [Auto-Hi], the camera will adjust the ISO sensitivity
automatically to obtain the optimal exposure.
The diagram in the following page gives an approximated estimate of
the shift range for various combinations of aperture values and shutter
speeds. The shift range changes depending on the exposure value (EV). In
this example, the flash mode is set to [Flash Off], and the ISO setting is set
to [ISO100]. For the largest aperture value, it is used together with the ND
filter. In this case, the degree to which the background is blurred does not
change. The degree of blurring is expressed as the aperture value (F value)
even when an ND filter is used.
Summary of Contents for P10 28-300mm F3.5-5.6 VC
Page 13: ...13 Parts of the Lens 1 3 2 1 Connector 2 Ring cap 3 Lens...
Page 66: ...66...
