Ricoh Network Scanning Unit A, Operating Instructions Manual

Page: 132 / 206

Sending Scan File by E-mail
124
5
Reference
See p.70 “Information to Reg-
ister in
[Scan Settings] ” for
details about each of the set-
up items.
Note
❒
For example, [ Resolution ] is
selected here.
C
Highlight the option you wish
to select by using the
{{{{ 1 1 1 1 }}}}
or
{{{{ 0
0 0
0 }}}}
key, and then press [ OK ] .
Note
❒
Pressing [ Cancel ] discards the
selected option, and returns
to the previous screen.
❒
When you select “Custom
Resolution” for
[ Resolution ]
and/or “Custom Area Set-
ting” for
[ Scan Size ]
, use the
Number keys to specify the
values.
D
Repeat the steps
B
B B
B
and
C
C C
C
as
necessary.
E
When you are finished, press
[ Exit ] .
This returns to the Scan Settings
screen.
F
Press [ OK ] .
This returns to the E-mail/Send
File standby screen, and the cur-
rent Scan Setting is displayed
on the third line of the screen.
Confirming the Scan Settings
You can confirm the current Scan Set-
tings, or the Scan Settings that you
have registered to
[ Default ] , [ User 1 ] ,
[ User 2 ] or [ User 3 ] .
Note
❒
You can confirm the [ Default ] set-
tings by selecting
[ Manual ]
in the
step
B
below, unless you configure
the Scan Settings manually. After
you have manually configured the
Scan Settings, selecting
[ Manual ]
displays the current settings.
AAAA
Press [ Settings ] .
The Scan Settings screen is dis-
played.
BBBB
Use the
{{{{ 1
1 1
1 }}}}
or
{{{{ 0
0 0
0 }}}}
key to high-
light [ Manual ] , [ User 1 ] , [ User 2 ] or
[ User 3 ] on the screen, and then
press [ Status ] .
The status screen appears.
CCCC
Use [
↓↓↓↓
Next ] or [
↑↑↑↑
Prev. ] to display
the setting of the setup item you
wish to confirm.
DDDD
When you are finished, press
[ Exit ]
.