Ricoh Neptune-P1, Service Manual

Page: 115 / 457

1. Disconnect the ground wire [A] and connector [B] on the left (  x 1,  x 1,  x 1).
2. Disconnect the ground wire [C] and connector [D] on the right (  x 1,  x 1,  x 1).
3. Remove the rear cover (

x 2). (See p.113 "Rear Cover".)
4. Raise the paper exit [A] unit approximately 30° from horizontal.
5. Pull the unit away from the left [B] and right [C] hinges.
Front Panel and Opening the Top
1. Side covers. (See p.112 "Side Covers".)
2. Remove the front panel.
[A]: Shoulder screw (  x1)
[B]: Screw (

x1)
[C]: Slide the panel toward you to remove it
3. Replacement and Adjustment
114
3