Ricoh MP9200A, User Manual

Page: 10 / 38

Explains the system environment required for using the drive as a CD-R/CD-RW drive.
PC IBM PC/AT compatible
Operating System Windows Me/98/95(ORS2 or later)
Windows NT Workstation Ver.4.0 (Service Pack 5) or later
Windows 2000 (Professional)
CPU Pentium 166 MHz or higher (When using JustLink)
Memory 64MB or more
Hard disk Hard disk with average access time of 19msec or less, and data transfer speed of
1,200KB/sec or greater. 1GB or more free space.
Interface Enhanced-IDE interface (as Primary Slave, Secondary Master, or Slave)
Drive bay 5.25-inch half height bay required
Power +5V/+12V power socket required
Recommendation discs
*2
Recommendation Tested to be compatible
CD-R Ricoh
Taiyo Yuden, Mitsui Chemicals, Mitsubishi
Chemical, Maxell
CD-RW Ricoh Mitsubishi Chemical
*1
High Speed CD-RW Ricoh Mitsubishi Chemical
*1 The disc written using the CD-R/RW drive may not be readable by CD-ROM drives.
Multi-read compatible (Random UDF compatible) drives are necessary.
*2
Even if it is the recommendation disc, some of discs may have possibility to fail
writing with highest writing speed with the problem on the disc. In this case, please
try to write with lower writing speed, or please try to use another disc.
Multi-read compatible (Random UDF compatible) drives are:
Drives that can read low reflectivity discs.
●
Drives that support Packet Write.
●