Ricoh MP9060A - MediaMaster - CD-RW, User Manual

Page: 9 / 40

System environment
Explains the system environment required for using the drive as a CD-R/CD-RW drive.
PC IBM PC/AT compatible
Operating System Windows 98/95
Windows NT Workstation Ver.4.0 (Service Pack 3) or later
CPU 166MHz (or faster) Pentium
Memory Windows 98/95 : 32MB or greater.
Windows NT Workstation Ver.4.0 : 32MB or greater (64MB or
more recommended)
Harddisk Hard disk with average access time of 19msec or less, and
data transfer speed of 1,200KB/sec or greater. 75MB or more
free space.(The free space needed for writing depends on the
quantity of data.)
*1
Interface Enhanced-IDE interface (as Primary Slave, Secondary Master,
or Slave)
Drive bay 5.25-inch half height bay required
Power +5V/+12V power socket required
CD-R, CD-RW discs Ricoh, Mitsubishi Chemical, Taiyo Yuden, Mitsui Chemicals,
Ritek, CMC, Princo, TDK, Kodak, Memorex, Maxcell or Fhilips
discs are recommended.
*2
*1 Average access time of 12msec or less and data transfer speed of 5MB/sec or greater are
recommended.
*2 The disc written using the CD-R/RW drive may not be readable by CD-ROM drives.
Multi-read compatible (Random UDF compatible) drives are necessary.
Multi-read compatible (Random UDF compatible) drives are:
Drives that can read low reflectivity discs.
●
Drives that support Packet Write.
●
<<Contents