Front Panel
Disc tray
This is the tray for the disc. Place the disc on the ejected disc tray, then lightly push the tray (or
push the eject button) and the disc will be mounted.
Caution
Don't use force to pull out or push in the disc tray. This might cause damage to the
loading section of the drive.
1.
Headphone jack
This jack is for connecting headphones or mini-speakers.
2.
Volume control
This is used to adjust the output volume of the headphone jack. It can't be used to adjust the
output volume for the audio output connectors on the rear panel.
Caution
Turn the volume down before turning on the power. Sudden loud noises can damage
your hearing.
3.
Busy indicator
This indicator lights orange when a disc is mounted into the drive. When the disc is being
accessed, it flashes or lights orange. If a disc is not mounted, the indicator does not light even
4.
Summary of Contents for MP7163A
