Ricoh M116, Service Manual

Page: 82 / 165

Service Program Mode
M116/M117 5-4 SM
Engine Maintenance
Registration
Horiz.: Tray 2
Adjusts the horizontal registration for tray 1. If the
machine settings are reset to the factory defaults, this
value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vert.T2.Plain
Adjusts the vertical registration of plain paper for tray
2. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vert.T2.Thick
Adjusts the vertical registration of thick paper for tray
2. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vert.T2.Thin
Adjusts the vertical registration of thin paper for tray 2.
If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Registration
Horiz.: Bypass
Adjusts the horizontal registration for the bypass tray.
If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vert.BP.Plain
Adjusts the vertical registration of plain paper for the
bypass tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vert.BP.Thick
Adjusts the vertical registration of thick paper for the
bypass tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]