5846 053
Clear Backup Info
*CTL
Deletes the address book data from the SD card in the service slot.
Deletes only the files that were uploaded from this machine.
This feature does not work if the card is write-protected.
• After you do this SP, go out of the SP mode, and then turn the power off. Do not
remove the SD card until the Power LED stops flashing.
5846 060
Search option
*CTL
This SP uses bit switches to set up the fuzzy search options for the UCS local address
book.
Bit: Meaning
Bit0: Checks both upper/lower case characters
Bit1: Japan Only
Bit2 to 7
5846 062
Compl Opt1
*CTL
[0 to 32 / 0 / 1 /step]
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to upper case and sets the length of the
password.
• This SP does not normally require adjustment.
• This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
5846 063
Compl Opt2
*CTL
[0 to 32 / 0 / 1 /step]
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to lower case and defines the length of the
password.
• This SP does not normally require adjustment.
• This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
Main SP Tables: 1
137
5
Summary of Contents for M075
